News

Home Products

News

Dehumidifier frost is a common problem that usually occurs in low-temperature environments. Frost not only affects the efficiency of the dehumidifier, but may also cause damage to the equipment. The reasons for dehumidifier frost can be attributed to the following main aspects:

1. The ambient temperature is too low

Cause: The working principle of the dehumidifier relies on condensing the moisture in the air into water droplets and then discharging them. If the ambient temperature is too low (usually below 18°C), the surface temperature of the condenser (evaporator) may be below freezing, causing water vapor to freeze on the condenser instead of turning into water droplets.

Solution: When using a dehumidifier in a low-temperature environment, you can choose a dehumidifier designed for low-temperature environments, or keep the indoor temperature slightly higher when using it, avoiding it falling below the specified operating temperature range of the device.

2. The air humidity is too high

Cause: In an environment with very high air humidity, the dehumidifier may need to handle a large amount of water vapor. When the moisture in the air cools on the condenser, the risk of freezing increases. Especially when the humidity is too high and the temperature is low, the moisture in the air may condense into ice quickly.

Solution: You can reduce moisture accumulation and avoid excessive humidity by regularly ventilating the room or adjusting the humidity.

3. Fault in the dehumidifier itself

Cause: If there is a problem with the refrigeration system of the dehumidifier, such as insufficient refrigerant or compressor failure, the condenser temperature may drop abnormally, resulting in frosting. In addition, dirty blockage of the condenser (such as dust accumulation) will also affect the heat exchange effect and cause frosting.

Solution: Check the dehumidifier regularly, clean the condenser and filter, and ensure the normal operation of the refrigeration system. If a fault is suspected, it is recommended to contact a professional maintenance personnel for inspection and repair.

4. Dirty and blocked filter

Cause: The filter is full of dust or debris, which will affect the air circulation, making the internal temperature of the dehumidifier uneven, resulting in too low a surface temperature of the condenser, and then frosting.

Solution: Clean or replace the filter regularly to maintain good air circulation in the dehumidifier.

5. Air speed is too low

Cause: The dehumidifier fan is responsible for sucking air in and blowing it toward the condenser. If the air speed is set too low or the fan fails, insufficient air flow will cause the condenser surface temperature to be too low, resulting in frost.

Solution: Check the operation of the fan to ensure that it is working properly.

6. Equipment overload or improper use

Cause: If the dehumidifier is overloaded or used outside the designed applicable environment (such as too low temperature, too high humidity), it may also cause frost.

Solution: Use the dehumidifier as recommended in the product manual and do not overuse it, especially in extreme environments. If the ambient humidity is too high or the temperature is too low, consider reducing the dehumidifier's workload or using a suitable model.

7. Water tray or drainage system problems

Cause: If the dehumidifier's water tray or drainage system is blocked, the condensed water cannot be discharged smoothly and may accumulate and freeze on the condenser.

Solution: Check and ensure that the drainage system is unobstructed, and clean the water tray and drainage pipes regularly.

Summary

The main reasons for dehumidifier frost are usually related to ambient temperature, humidity, equipment failure or improper use. To avoid frost problems, you can prevent and solve them by adjusting the indoor temperature and humidity, regularly maintaining the equipment, and ensuring the normal operation of the equipment. If the frost problem persists, it is recommended to ask a professional technician to check whether there is a hardware failure in the equipment.